Please note that this probe is NOT compatible with the 456C gauge. Instead, see part numbers 15090xxxx).
Uses the electromagnetic induction principle to measure non-magnetic coatings on a magnetic metal base. This includes paint, electroplating, galvanising, hard chrome, sprayed metal, powder coating, plastic, epoxy, rubber, ceramic, etc. on substrates such as steel, cast iron, and ferritic and duplex stainless steel.
Max. operating temperature: 300 °F.
Minimum substrate thickness: 0.3 mm (12 mils).
Measuring range:
F1 mode= 0 - 1500 µm (0 - 60 mils).
F2 mode = 0 - 5 mm (0 - 200 mils).
Resolution:
F1 mode = Under 100 µm: 0,1 µm / Over 100 µm: 1 µm (Below 5 mils: 0.01 mils / Above 5 mils: 0.1 mils).
F2 mode = Under 1000 µm: 1 µm / Over 1000 µm: 10 µm (Below 50 mils: 0.1 mils / Above 50 mils: 1 mils).
Accuracy:
F1 mode = ±3 % or ±2,5 µm ±1 % or ±2,5 µm (±3 % or ±0.1 mils ±1 % or ±0.1 mils).
F2 mode = ±3 % or ±20 µm ±1 % or ±20 µm (±3 % or ±1.0 mils ±1 % or ±1.0 mils).
Minimum convex surface diameter: 4 mm.
Minimum concave surface radius: 25 mm.
Headroom: F1 mode = 85 mm. (3.35")/ F2 mode = 89 mm (3.50").
Minimum sample diameter: F1 mode = 4 mm (0.16") / F2 mode = 8 mm (0.32").
Uses the electromagnetic induction principle to measure non-magnetic coatings on a magnetic metal base. This includes paint, electroplating, galvanising, hard chrome, sprayed metal, powder coating, plastic, epoxy, rubber, ceramic, etc. on substrates such as steel, cast iron, and ferritic and duplex stainless steel.
Max. operating temperature: 300 °F.
Minimum substrate thickness: 0.3 mm (12 mils).
Measuring range:
F1 mode= 0 - 1500 µm (0 - 60 mils).
F2 mode = 0 - 5 mm (0 - 200 mils).
Resolution:
F1 mode = Under 100 µm: 0,1 µm / Over 100 µm: 1 µm (Below 5 mils: 0.01 mils / Above 5 mils: 0.1 mils).
F2 mode = Under 1000 µm: 1 µm / Over 1000 µm: 10 µm (Below 50 mils: 0.1 mils / Above 50 mils: 1 mils).
Accuracy:
F1 mode = ±3 % or ±2,5 µm ±1 % or ±2,5 µm (±3 % or ±0.1 mils ±1 % or ±0.1 mils).
F2 mode = ±3 % or ±20 µm ±1 % or ±20 µm (±3 % or ±1.0 mils ±1 % or ±1.0 mils).
Minimum convex surface diameter: 4 mm.
Minimum concave surface radius: 25 mm.
Headroom: F1 mode = 85 mm. (3.35")/ F2 mode = 89 mm (3.50").
Minimum sample diameter: F1 mode = 4 mm (0.16") / F2 mode = 8 mm (0.32").
